LED Strobe Light Kit

  • Manufactured by: Viking Electronics

(image for) Ask a Question

$199.00

Add to Cart:

Ringing Phone or TTY indication for the hearing impaired
• Ringing phone indication in loud warehouses and factories
• Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
• Alarm indication for security systems or alarm panels with phone dialers
• Durable polycarbonate lens
• High output long life LED technology
• Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
• 6 programmable beacon and strobe brightness settings
• Immune to shock and vibration
• Flush mount or surface mount with weatherproof single gang box (included)
• 3/4” knockouts for connecting conduit, etc.
• Strobe and control module may be installed separately
• Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
• One set of (NO) normally open and (NC) normally closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain flashing between rings)
• Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop detection
• Disable input, ideal for use with two-button emergency phones like Viking’s E-1600-20A (DOD# 215), will not activate strobe light on “Info” calls
• Power: 120V AC to 12V DC adapter provided
• Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft
• Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft
• Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
• Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0”)
• Shipping Weight: 1.5 kg (3.3 lbs)
• Operating Temperature: -26° to 54°C (-15° to 130° F)
• Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
• Minimum Loop Current: 15 mA
• Minimum Ring Voltage: 25V RMS
• Ringer Equivalence: 0.5 A REN
• Disable/Info Switch Input: 50mA/80mW maximum
• Humidity - BLK-4: 5% to 95% non-condensing
• Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
• Connections: Color coded wires with gel-filled butt connectors


This product was added to our catalog on Tuesday 18 February, 2014.

Important Links

Sponsors

(image for) Wireless Headset

(image for) Door Phones

(image for) Paging Systems

Have you seen ...

Manufacturer Info

Your IP Address is: 18.232.179.191
Copyright © 2024 =ESSI= Panasonic Phone Systems - 800 619 9566. Powered by Zen Cart